INTERNAL SEAL(Pipe-Pipe Joint)
Rehabilitation of Wells and Pipes.

The internal seals are designed to re-establish the watertightness of the joints between the manhole rings and the joints between pipes.

The seal is made up of a strip of elastic material which is positioned around the joint to be re-established and two expansive stainless steel bands which are positioned on both sides of the joint and which expand mechanically against the pipe or ring.

Available in a wide range of diameters and materials both for the elastic strip and the bands, and manufactured in parts in order to adapt to your individual requirements.

Can be installed easily inside wells and concrete pipes.

Back


Kor-N-Seal (Flexible Pipe-Well Connections)

Kor-N-Seal connectors were introduced 25 years ago and are now the most widely used. They allow a flexible joint between the pipe and well, guaranteeing watertightness even in the most difficult phreatic levels and situations between the pipe and the well.

They are made up of a neoprene or elastomer EPDM rubber, hence guaranteeing watertightness without the need for any adhesives or lubricants. They are resistant to acid, alkaline elements, grease, oils, etc.

Available in a wide range of diameters and materials in order to adapt to your individual needs.

Disponibles dans une large gamme de diamètres et de matériaux s’adaptant à vos besoins.

Models

Kor-N-Seal I from 46 to 535 mm.
Kor-N-Seal II from 381 to 1,295 mm.
Kor-N-Seal 306 for large Pipe diameters and small Well diameters
Connector for high-pressure
Adapter for corrugated pipe
Multiconnector


Retour

Kor-N-Tee (Side connections in concrete pipes)

Kor-N-Tee connectors are specifically designed for the side connection to concrete pipes.

Made up of an elastic connector and two bands, one of which is expandable within the main pipe and another which is attached to the pipe connected to the main pipe, they remove the need for sealants or resins and guarantee watertightness. They provide a flexible side connection which is adaptable to ground movement and help to prevent the breakages of rigid joints.

The side pipe is not allowed to project into the main pipe.
Diameters of 102 mm up to 254 mm in the side pipe.

 

Back

 

 

BOREHOLES FOR CONCRETE
Vertakor 1200. Portable drill.

Portable machine for drilling in manhole wells, pipes and square collection boxes.

Economical
Safe
Autonomous: with all its accessories
Easy to install
Flexible
For watertight joints
Has a wide range of options and accessories

Hydrokor. Non-portable drill.

Robust machines for drilling in concrete manhole wells, pipes and square collection boxes. Different models and accessories for different types of production, for reinforced and plain concrete.


Back

DIAMOND DRILLS

Manufactured specifically to individual diameters and materials.


Back