Footholds are principally safety elements which allow access to the inside of wells, collection boxes or large tanks.

For this reason, the quality of manufacture, the materials used and their definitive positioning must ensure the safety of the person accessing the inside of the well.

HIDROSTANK's polypropylene footholds are made using the best materials, in a quality manufacture process, thus guaranteeing a product which is completely safe to use and which will last a long time.

MODELS
Modelo
A
B
C
D
Bilbao
80
160
330
85
Standard
80
140
330
85
Barcelona
100
120
330
105

 
Modelo
A
B
C
D
300 (12")
80
160
300
85
330 (13")
80
160
330
85


POSITIONING

For the correct positioning of the foothold, once the concrete is set, drill two holes in line using a 25 mm bit, with the separation and depth indicated.

The foothold will be positioned in the said holes by banging on each end until the total depth is reached.

It is important to be accurate when making the holes, since the footholds do not require any kind of cement or filler, which should only be used to fill the holes when necessary in order to guarantee the correct positioning of the footholds.

 

PATE ERGONÓMICO


Back

TECHNICAL CHARACTERISTICS

- Metal insert
The footholds are made using AEH 500 corrugated steel rods of 12 mm.
- Plastic covering
The corrugated rod is covered with an appropriate copolymer material in order to resist corrosion conditions.
- Side section
Designed to prevent anything becoming attached
- Support surface
Made up of a strip floor to prevent slippage
- Effective stopper
To attach to the wall
- Grooved plugs
To fix the foothold in the concrete.
Back